sip-router
11 years agocore: don't force a socket if the dst af is different
Andrei Pelinescu-Onciul [Wed, 15 Oct 2008 14:13:56 +0000 (14:13 +0000)]
core: don't force a socket if the dst af is different

- get_send_socket() will now ignore a forced send socket if the destination
 address family is different from the forced socket (e.g. force ipv6 but
 attempt to send to ipv4). A non-obvious example of a scenario triggering
 this bug is registering over ipv4 an ipv6 contact.
 Reported by: Nils Ohlmeier <nils@iptel.org>

11 years agocore: fix socket list iteration
Andrei Pelinescu-Onciul [Wed, 15 Oct 2008 10:27:47 +0000 (10:27 +0000)]
core: fix socket list iteration

- socket list iteration didn't work properly on ser startup when some
of the protocols where compile-time disabled (no support for them compiled).
Symptomps: ser -l lo -f ser.cfg  prints a BUG message and doesn't start.
- small socket list related cleanups

11 years agosctp: if SCTP support not compiled, next_proto() shouldn't return SCTP
Andrei Pelinescu-Onciul [Tue, 14 Oct 2008 14:13:14 +0000 (14:13 +0000)]
sctp: if SCTP support not compiled, next_proto() shouldn't return SCTP

- minor fix: if no SCTP support was compiled, init_proto_order() didn't
 remove PROTO_SCTP references and this caused a BUG message on ser start

11 years agoCFG_READONLY flag is introduced. Variables marked with this flag
Miklos Tirpak [Mon, 13 Oct 2008 14:09:18 +0000 (14:09 +0000)]
CFG_READONLY flag is introduced. Variables marked with this flag
can be stored in the configuration framework even if they are read-only.

11 years agosctp: if USE_COMP, set comp to none
Andrei Pelinescu-Onciul [Thu, 9 Oct 2008 07:32:59 +0000 (07:32 +0000)]
sctp: if USE_COMP, set comp to none

11 years agosctp: more compatibility changes with old sctp versions
Andrei Pelinescu-Onciul [Tue, 7 Oct 2008 11:23:49 +0000 (11:23 +0000)]
sctp: more compatibility changes with old sctp versions

- warn about missing sctp sockopt at compile time too
- fow now ignore sctp adaption layer events (not supported by lksctp
1.0.6 which unfortunately is still widely used)

11 years agosctp: suggest kernel upgrade if not all the sctp options are supported
Andrei Pelinescu-Onciul [Tue, 7 Oct 2008 11:23:23 +0000 (11:23 +0000)]
sctp: suggest kernel upgrade if not all the sctp options are supported

11 years agosctp: command line options fix
Andrei Pelinescu-Onciul [Tue, 7 Oct 2008 11:22:56 +0000 (11:22 +0000)]
sctp: command line options fix

- some sctp options were untreated in the first getopt() switch, causing ser
to immediately abort() if the options were used

11 years agosctp: support for older sctp libraries and autoclose fix
Andrei Pelinescu-Onciul [Tue, 7 Oct 2008 11:22:43 +0000 (11:22 +0000)]
sctp: support for older sctp libraries and autoclose fix

- try to compile even if the used sctp library doesn't support all the
 sctp socket options that we would like to set, but warn about it both at
 compile time and each time ser is started
- ser -V will print a list of unsupported sctp options (due to missing
support in the sctp library/*.h files that ser was compiled against)
- fix: the autoclose sctp socket option was not properly set (paste typo)

11 years agosctp: added sctp_enable and sctp auto mode
Andrei Pelinescu-Onciul [Tue, 7 Oct 2008 11:22:05 +0000 (11:22 +0000)]
sctp: added sctp_enable and sctp auto mode

- added a new ser.cfg option: sctp_enable = 0|1|2. 0 means disable
 (equivalent with sctp_disable=yes), 1 enable (sctp_disable=no) and
  2 is auto mode (sctp enabled only if supported by the OS).
- sctp is now by default in auto enable mode: enabled if supported by the OS

11 years agodns_*_preference updated to include sctp
Andrei Pelinescu-Onciul [Tue, 7 Oct 2008 11:21:32 +0000 (11:21 +0000)]
dns_*_preference updated to include sctp

11 years agosctp: set TOS and ignore unsuported socket options
Andrei Pelinescu-Onciul [Wed, 1 Oct 2008 17:32:36 +0000 (17:32 +0000)]
sctp: set TOS and ignore unsuported socket options

- set TOS
- ignore non-critical unsuported socket options for better compatibility with
older kernels (e.g. 2.6.18 does not support SCTP_FRAGMENT_INTERLEAVE or
 SCTP_PARTIAL_DELIVERY_POINT)

11 years agosctp: init function for one-to-one sockets
Andrei Pelinescu-Onciul [Wed, 1 Oct 2008 17:32:06 +0000 (17:32 +0000)]
sctp: init function for one-to-one sockets

11 years agosctp: cleanup
Andrei Pelinescu-Onciul [Wed, 1 Oct 2008 17:30:57 +0000 (17:30 +0000)]
sctp: cleanup

sctp_init_sock() broken into several functions (sctp_init_su,
sctp_init_sock_opt_common, sctp_bind_sock), to allow for code reuse
with a future sctp one-to-one implementation.

11 years agoenable is renamed to enabled
Miklos Tirpak [Mon, 15 Sep 2008 15:53:44 +0000 (15:53 +0000)]
enable is renamed to enabled

11 years agoenable is renamed to enabled (enable is a keyword)
Miklos Tirpak [Mon, 15 Sep 2008 15:51:44 +0000 (15:51 +0000)]
enable is renamed to enabled (enable is a keyword)

11 years agoadding debconf options for disabling replication, which were already there but someon...
Pavel Kasparek [Mon, 15 Sep 2008 15:25:10 +0000 (15:25 +0000)]
adding debconf options for disabling replication, which were already there but someone deleted them

11 years agotypo fixed
Pavel Kasparek [Mon, 15 Sep 2008 14:40:47 +0000 (14:40 +0000)]
typo fixed

11 years agoDebian packaging - another attempt to make compilation and installation of modules...
Pavel Kasparek [Mon, 15 Sep 2008 14:24:10 +0000 (14:24 +0000)]
Debian packaging - another attempt to make compilation and installation of modules work again: reverting back to using of group_include and adding cleaning of saved config and saved module list before every call to make

11 years agoDebian packaging - added make modules
Pavel Kasparek [Mon, 15 Sep 2008 13:43:57 +0000 (13:43 +0000)]
Debian packaging - added make modules

11 years agoDebian packaging - replacing using of include_modules by modules
Pavel Kasparek [Mon, 15 Sep 2008 13:34:00 +0000 (13:34 +0000)]
Debian packaging - replacing using of include_modules by modules

11 years agoDebian packaging - trying to make modules installation work again, it installs lot...
Pavel Kasparek [Mon, 15 Sep 2008 12:56:27 +0000 (12:56 +0000)]
Debian packaging - trying to make modules installation work again, it installs lot of other modules not specified using include_modules=".."

11 years agoDebian packaging - forgotten " removed
Pavel Kasparek [Mon, 15 Sep 2008 12:03:19 +0000 (12:03 +0000)]
Debian packaging - forgotten " removed

11 years agoDebian packaging - fixed wrong format of variables assignment
Pavel Kasparek [Mon, 15 Sep 2008 12:01:24 +0000 (12:01 +0000)]
Debian packaging - fixed wrong format of variables assignment

11 years agoDebian packaging - replacing inclusion of modules by group by listing them individually
Pavel Kasparek [Mon, 15 Sep 2008 11:57:27 +0000 (11:57 +0000)]
Debian packaging - replacing inclusion of modules by group by listing them individually

11 years agoDebian packaging changes:
Pavel Kasparek [Mon, 15 Sep 2008 10:11:53 +0000 (10:11 +0000)]
Debian packaging changes:
- removing make proper in libs, which is done by main make proper anyway
- adding more modules to list of excluded modules (temporary hack until group inclusion of modules to compile works)

11 years agoremoving avpops module from list of standard modules, as it is unmaintained and all...
Pavel Kasparek [Mon, 15 Sep 2008 09:25:41 +0000 (09:25 +0000)]
removing avpops module from list of standard modules, as it is unmaintained and all the AVP functionality is already in the core

11 years agoadding debconf option for enabling/disabling rtp proxy
Pavel Kasparek [Mon, 15 Sep 2008 07:59:25 +0000 (07:59 +0000)]
adding debconf option for enabling/disabling rtp proxy

11 years agortp_proxy.enable configuration option is introduced, the following
Miklos Tirpak [Fri, 12 Sep 2008 11:01:19 +0000 (11:01 +0000)]
rtp_proxy.enable configuration option is introduced, the following
values are supported:
"0" -- disable
"1" -- enable
"detect" -- detect whether the UAC or the UAS is behind NAT, and enable
the RTP Proxy when necessary

WARNING: disabling the RTP Proxy runtime may leave the RTP sessions
being proxied unmaintained.

11 years agoudp_flood sctp portability fix
Andrei Pelinescu-Onciul [Wed, 3 Sep 2008 20:17:04 +0000 (20:17 +0000)]
udp_flood sctp portability fix

- compiles now wit -DUSE_SCTP on freebsd 7.0

11 years agosctp enabled for freebsd
Andrei Pelinescu-Onciul [Wed, 3 Sep 2008 20:15:43 +0000 (20:15 +0000)]
sctp enabled for freebsd

- ser can now be compiled on freebsd 7.0 with sctp support
(gmake SCTP=1 cfg-defs ; gmake all)

11 years agosctp portability fixes
Andrei Pelinescu-Onciul [Wed, 3 Sep 2008 20:14:22 +0000 (20:14 +0000)]
sctp portability fixes

- the code is now more portable

11 years agosctp cfg typo fix
Andrei Pelinescu-Onciul [Wed, 3 Sep 2008 20:13:23 +0000 (20:13 +0000)]
sctp cfg typo fix

- typo fixed in cfg.lex (the options for setting the send or receive buffer
sizes did not work)

11 years agomultiple connection support
Andrei Pelinescu-Onciul [Wed, 27 Aug 2008 08:39:50 +0000 (08:39 +0000)]
multiple connection support

- enabled support for opening multiple connections (-n con_no)

11 years agosctp support
Andrei Pelinescu-Onciul [Wed, 27 Aug 2008 08:39:12 +0000 (08:39 +0000)]
sctp support

- compile with -DUSE_SCTP -lsctp and using -S command line flag will
  cause udp_flood to send packets using SCTP.

11 years agosctp minor fix
Andrei Pelinescu-Onciul [Wed, 27 Aug 2008 08:38:08 +0000 (08:38 +0000)]
sctp minor fix

- ancillary data worked only the first time (msg_control was intialized
  only once)

11 years agosctp support for more notification
Andrei Pelinescu-Onciul [Wed, 27 Aug 2008 08:36:53 +0000 (08:36 +0000)]
sctp support for more notification

- support all relevant notifications, for now just dump some DBG() info

11 years agosctp event notification and ancillary info
Andrei Pelinescu-Onciul [Wed, 27 Aug 2008 08:35:19 +0000 (08:35 +0000)]
sctp event notification and ancillary info

- debugging: print stream number, ppid, flags, tsn, cumtsn and assoc_id
  for each received packet (DBG())
- handle notifications (for now only print info about them)

11 years ago- fixed wrong tls config name
Jan Janak [Mon, 25 Aug 2008 14:50:51 +0000 (14:50 +0000)]
- fixed wrong tls config name

11 years ago- use standalone configuration file for tls
Jan Janak [Mon, 25 Aug 2008 14:30:35 +0000 (14:30 +0000)]
- use standalone configuration file for tls

11 years agofixed segfault in case of SCTP failover
Nils Ohlmeier [Sun, 24 Aug 2008 11:49:01 +0000 (11:49 +0000)]
fixed segfault in case of SCTP failover

11 years agofixed wrong function name in error message
Nils Ohlmeier [Sat, 23 Aug 2008 22:15:43 +0000 (22:15 +0000)]
fixed wrong function name in error message

11 years agocommand line support for address lists (-l)
Andrei Pelinescu-Onciul [Tue, 19 Aug 2008 18:37:52 +0000 (18:37 +0000)]
command line support for address lists (-l)

Support for specifying and address list for -l (e.g. -l (foo, bar)). For
sctp all the address in the list will be used for multi-homing.

11 years agoenable sctp multihoming support
Andrei Pelinescu-Onciul [Mon, 18 Aug 2008 14:56:32 +0000 (14:56 +0000)]
enable sctp multihoming support

- listen on multiple sctp addresses, the primary address being the first
 one in the list.

11 years agosctp multi-homing config support
Andrei Pelinescu-Onciul [Mon, 18 Aug 2008 14:55:13 +0000 (14:55 +0000)]
sctp multi-homing config support

- config support for sctp multi-homing (listen on multiple addresses in the
   same time).
   Format:  sctp:(addr1, addr2, addr3)
            sctp:(eth0)   -> will listen on all eth0 addresses in the same
                             time
           (eth0,lo) -> sctp will listen on all addresses from eth0 & lo
                        in the same time, while the other protocols will
                        create different socket for each of the addresses
                        (e.g.: for udp it would be equivalent with:
                        listen= udp:eth0 udp:lo)
   The first address is always the main one.
   Conflicts are resolved automatically, by removing the duplicates. Main
   addresses have priority (e.g: sctp:(lo,eth0) sctp:(eth0,eth1) after
   duplicate removal will become sctp:(lo) sctp:(eth0,eth1)).

- try to always keep the order in which listen addresses were given in
  config (fixes reordering between interface names and hostnames, e.g.
  listen= eth0 foo.bar resulted in ip(foo.bar) , ip(eth0) )

11 years agoinit_naptr_proto_prefs sctp fix
Andrei Pelinescu-Onciul [Mon, 18 Aug 2008 14:49:57 +0000 (14:49 +0000)]
init_naptr_proto_prefs sctp fix

- fixed init_naptr_proto_prefs sanity checks

11 years agoSCTP protocol name support in ser.cfg
Andrei Pelinescu-Onciul [Mon, 18 Aug 2008 14:47:33 +0000 (14:47 +0000)]
SCTP protocol name support in ser.cfg

- added missing support for SCTP in proto=..., listen a.s.o

12 years agoAddress of serusers mailing list updated
Jan Janak [Thu, 14 Aug 2008 13:17:05 +0000 (13:17 +0000)]
Address of serusers mailing list updated

12 years agoupdated .cvsignore
Andrei Pelinescu-Onciul [Wed, 13 Aug 2008 14:49:46 +0000 (14:49 +0000)]
updated .cvsignore

- added the new autogenerated make related files, *.d, *.so, vi .swp a.s.o

12 years ago- sctp preference support in naptr queries (added a new ser.cfg option:
Andrei Pelinescu-Onciul [Tue, 12 Aug 2008 09:51:32 +0000 (09:51 +0000)]
- sctp preference support in naptr queries (added a new ser.cfg option:
dns_sctp_pref, see doc/dns.txt for more details)

12 years ago- sctp support
Andrei Pelinescu-Onciul [Mon, 11 Aug 2008 17:41:16 +0000 (17:41 +0000)]
- sctp support
- added t_relay_to_sctp(). t_replicate_sctp(), t_forward_nonack_sctp()

12 years ago- core sctp support
Andrei Pelinescu-Onciul [Fri, 8 Aug 2008 20:47:53 +0000 (20:47 +0000)]
- core sctp support

12 years ago- experimental sctp support (one to many)
Andrei Pelinescu-Onciul [Fri, 8 Aug 2008 20:47:23 +0000 (20:47 +0000)]
- experimental sctp support (one to many)

12 years ago- support for sctp
Andrei Pelinescu-Onciul [Fri, 8 Aug 2008 20:45:40 +0000 (20:45 +0000)]
- support for sctp

12 years ago- workaround for type declaration conflicts between linux-libc-dev and libc
Andrei Pelinescu-Onciul [Thu, 7 Aug 2008 13:29:09 +0000 (13:29 +0000)]
- workaround for type declaration conflicts between linux-libc-dev and libc
  headers on x86_64 debian (in one place declared as long int and in another as
  long long)

12 years ago- excluded auth_identity from the default compilation list
Andrei Pelinescu-Onciul [Thu, 7 Aug 2008 13:15:24 +0000 (13:15 +0000)]
- excluded auth_identity from the default compilation list

12 years ago- magic include reordering to work around type declaration conflicts between
Andrei Pelinescu-Onciul [Wed, 6 Aug 2008 15:24:27 +0000 (15:24 +0000)]
- magic include reordering to work around type declaration conflicts between
linux-libc-dev and libc headers in debian

12 years ago- when starting ser in suid mode (e..g -u user), set also the supplementary
Andrei Pelinescu-Onciul [Tue, 29 Jul 2008 12:06:50 +0000 (12:06 +0000)]
- when starting ser in suid mode (e..g -u user), set also the supplementary
 groups of the respective user.
 Patch from Marcus Better <marcus@better.se>.

12 years agoMan pages for auth and avp.
Martin Hoffmann [Mon, 28 Jul 2008 14:58:25 +0000 (14:58 +0000)]
Man pages for auth and avp.

12 years ago- update: nonce_auth_max_drift, auth_extra_checks split into auth_checks_*
Andrei Pelinescu-Onciul [Thu, 17 Jul 2008 13:37:49 +0000 (13:37 +0000)]
- update: nonce_auth_max_drift, auth_extra_checks split into auth_checks_*

12 years ago- fix: ifdef __CPU_i386 define __CPU_x86
Andrei Pelinescu-Onciul [Thu, 17 Jul 2008 10:12:07 +0000 (10:12 +0000)]
- fix: ifdef __CPU_i386 define __CPU_x86

12 years ago- ser equivalents to time(2) and gettimeofday(2), using internal ser time
Andrei Pelinescu-Onciul [Thu, 17 Jul 2008 07:51:34 +0000 (07:51 +0000)]
- ser equivalents to time(2) and gettimeofday(2), using internal ser time
 (faster then making a syscall, but at least in the gettimeofday case more
  imprecise, can be about 0.1-0.2 s off)

12 years agoadded function qm_check\(\) which checks integrity of pkg mem.
Libor Chocholaty [Mon, 14 Jul 2008 13:37:42 +0000 (13:37 +0000)]
added function qm_check\(\) which checks integrity of pkg mem.
If you have a problem with memory you can include qm_check() into lovely places in your code and at these checkpoints
integrity pf pkg memory will be checked.

12 years ago- makecfg.lst INCLUDES comparison allows now for differences in whitespace
Andrei Pelinescu-Onciul [Mon, 14 Jul 2008 13:14:11 +0000 (13:14 +0000)]
- makecfg.lst INCLUDES comparison allows now for differences in whitespace
 (thank to Pavel Kasparek <pavel@iptel.org>)

12 years ago- auth update
Andrei Pelinescu-Onciul [Thu, 10 Jul 2008 17:11:03 +0000 (17:11 +0000)]
- auth update

12 years ago- update (recent auth changes)
Andrei Pelinescu-Onciul [Wed, 9 Jul 2008 20:25:05 +0000 (20:25 +0000)]
- update (recent auth changes)

12 years ago- base64 init and endianness checks on startup
Andrei Pelinescu-Onciul [Wed, 2 Jul 2008 12:07:37 +0000 (12:07 +0000)]
- base64 init and endianness checks on startup

12 years ago- typo
Andrei Pelinescu-Onciul [Tue, 1 Jul 2008 21:56:06 +0000 (21:56 +0000)]
- typo

12 years ago- added fast base64 and base16 encoders/decoders along with test program and
Andrei Pelinescu-Onciul [Tue, 1 Jul 2008 20:33:20 +0000 (20:33 +0000)]
- added fast base64 and base16 encoders/decoders along with test program and
 some results

12 years ago- moved modules list from config.mak to modules.lst and added modules list
Andrei Pelinescu-Onciul [Tue, 1 Jul 2008 20:31:55 +0000 (20:31 +0000)]
- moved modules list from config.mak to modules.lst and added modules list
 reconfigure targets: make modules-cfg ... (this allows changing the modules
  list without triggering a complete recompile)
- added make cfg-defs which would change only the build options, without
 modifying the modules list

12 years agoDon't include stuff in man pages that is marked rule="admin-guide"
Martin Hoffmann [Tue, 1 Jul 2008 18:00:31 +0000 (18:00 +0000)]
Don't include stuff in man pages that is marked rule="admin-guide"

12 years ago- added clean-all and proper-all (like clean and proper but work on all the
Andrei Pelinescu-Onciul [Sat, 28 Jun 2008 20:45:10 +0000 (20:45 +0000)]
- added clean-all and proper-all (like clean and proper but work on all the
 modules, not only the one currently configured)

12 years ago- added install-modules-man and made make install also imake & install the
Andrei Pelinescu-Onciul [Sat, 28 Jun 2008 20:16:36 +0000 (20:16 +0000)]
- added install-modules-man and made make install also imake & install the
modules man pages (if present)

- added try_err function to Makefile.shared, for checking and reporting if
 a shell command failed (if err_fail is 1 it will also force an error return
 from the current makefile subshell)

- install-share, install-utils, install-modules-doc, install-modules-man will
 now fail if err_fail=1 (default) and one of the individual file install
 fails. Closes  SER-389.

12 years ago- first compile all the code and then install (at the price of slightly
Andrei Pelinescu-Onciul [Sat, 28 Jun 2008 17:51:20 +0000 (17:51 +0000)]
- first compile all the code and then install (at the price of slightly
slower make install)
Closes SER-390.

12 years ago- new files needed by the improved build system
Andrei Pelinescu-Onciul [Sat, 28 Jun 2008 00:36:56 +0000 (00:36 +0000)]
- new files needed by the improved build system

12 years ago- experimental make cfg /config support: make cfg fore regeneration of the
Andrei Pelinescu-Onciul [Sat, 28 Jun 2008 00:35:25 +0000 (00:35 +0000)]
- experimental make cfg /config support: make cfg fore regeneration of the
 "build" config, saved in config.mak. This config is used instead of
 including Makefile.defs each time. The config is also automatically
 generated if missing. The speed improvements are dramatic in most cases:
  make proper 15 times faster, make clean 8 times, make with generated
  config 2.6 times faster then before, make rebuilding only one file 9 times
  faster.
  E.g.: make cfg include_modules=mysql CPU=pentium-m BASEDIR=/tmp/ser
        make install  # builds default ser + mysql, optimized for pentium-m
                      # and installs in /tmp/ser/usr/local/*
        make clean    # cleans default modules + mysql

12 years agoignore ser tarballs
Jan Janak [Thu, 26 Jun 2008 12:33:23 +0000 (12:33 +0000)]
ignore ser tarballs

12 years ago- .cvsignore with libprint.so.* added
Jan Janak [Thu, 26 Jun 2008 12:12:42 +0000 (12:12 +0000)]
- .cvsignore with libprint.so.* added

12 years ago- .cvsignore with libser_presence.so.* added
Jan Janak [Thu, 26 Jun 2008 12:11:42 +0000 (12:11 +0000)]
- .cvsignore with libser_presence.so.* added

12 years ago- adding .cvsignore with libser_cds.so.*
Jan Janak [Thu, 26 Jun 2008 12:09:12 +0000 (12:09 +0000)]
- adding .cvsignore with libser_cds.so.*

12 years ago- adding .cvsignore with sercmd
Jan Janak [Thu, 26 Jun 2008 12:06:03 +0000 (12:06 +0000)]
- adding .cvsignore with sercmd

12 years ago- missing include Makefile.targets
Andrei Pelinescu-Onciul [Thu, 26 Jun 2008 10:08:03 +0000 (10:08 +0000)]
- missing include Makefile.targets

12 years ago- don't try to autodetect libreadline for a no-build target
Andrei Pelinescu-Onciul [Thu, 26 Jun 2008 09:08:53 +0000 (09:08 +0000)]
- don't try to autodetect libreadline for a no-build target
 (e.g. clean). It uses Makefile.targets to get the list of no code-building
 targets.

12 years ago- don't try to build dependencies or lex/yacc stuff unless it's really
Andrei Pelinescu-Onciul [Thu, 26 Jun 2008 09:07:35 +0000 (09:07 +0000)]
- don't try to build dependencies or lex/yacc stuff unless it's really
 necessary (makefile target != clean,doc,modules, a.s.o ; for the complete
 long list see Makefile.targets)

12 years ago- support for files installed in '*/share/ser'
Jan Janak [Thu, 26 Jun 2008 00:54:13 +0000 (00:54 +0000)]
- support for files installed in '*/share/ser'
- replace the path to sql files in ser_mysql.sh during install
- install SQL files for mysql
  (to be continued)

12 years ago- removed version table which is not needed anymore in 2.1
Jan Janak [Thu, 26 Jun 2008 00:43:06 +0000 (00:43 +0000)]
- removed version table which is not needed anymore in 2.1

12 years ago- reindented
Jan Janak [Thu, 26 Jun 2008 00:27:56 +0000 (00:27 +0000)]
- reindented

12 years agoMore flexible configuration of the path to the source database
Jan Janak [Thu, 26 Jun 2008 00:08:55 +0000 (00:08 +0000)]
More flexible configuration of the path to the source database
templates. There is a new configuration option in the script containing
the default path to the directory containing source database templates. The
value of that option will be updated during make install. Relative pathnames
are converted to absolute  pathnames with respect to the location of the
ser_dbtext.sh script.

12 years agoMore flexible configuration of the path to SQL script files. There is a new
Jan Janak [Thu, 26 Jun 2008 00:01:52 +0000 (00:01 +0000)]
More flexible configuration of the path to SQL script files. There is a new
configuration option in the script containing the default path to the
directory containing SQL script files. The value of that option will be
updated during make install. Relative pathnames are converted to absolute
pathnames with respect to the location of the ser_postgres.sh script.

12 years ago- support for SCRIPT_DIRECTORY conf. option
Jan Janak [Wed, 25 Jun 2008 23:45:51 +0000 (23:45 +0000)]
- support for SCRIPT_DIRECTORY conf. option
- -d cmd line option added
- help text reformatted
- more flexible searching of SQL script files

12 years agochanged default user and group to run ser as to root.root - it is needed for core...
Pavel Kasparek [Wed, 25 Jun 2008 12:34:54 +0000 (12:34 +0000)]
changed default user and group to run ser as to root.root - it is needed for core files generation

12 years ago- reset pointes when route set is missing, patch provided by Dragos Vingarnzan
Jan Janak [Tue, 24 Jun 2008 16:13:07 +0000 (16:13 +0000)]
- reset pointes when route set is missing, patch provided by Dragos Vingarnzan
  closes SER-266

12 years ago- reindented
Jan Janak [Tue, 24 Jun 2008 15:52:49 +0000 (15:52 +0000)]
- reindented

12 years ago - check defines and includes used at compile time and if different
Andrei Pelinescu-Onciul [Tue, 24 Jun 2008 14:39:52 +0000 (14:39 +0000)]
 - check defines and includes used at compile time and if different
   force rebuilding everything in the current dir (creates a new file:
   makecfg.lst that stores the compile defines & includes used at compile
   time). This should solve problems such as compiling mysql with malloc
  debugging, modifiyng a file and then recompiling without malloc debugging.

12 years agofixing install target - using underscore instead of dash in INSTALL-* and cfg-*
Pavel Kasparek [Tue, 24 Jun 2008 07:39:21 +0000 (07:39 +0000)]
fixing install target - using underscore instead of dash in INSTALL-* and cfg-*

12 years ago- README target support: make README will regenerate the README from all
Andrei Pelinescu-Onciul [Mon, 23 Jun 2008 18:35:26 +0000 (18:35 +0000)]
- README target support: make README will regenerate the README from all
  the current modules
- man target: (experimental) make man will generate a man page for all the
  modules that support it (.xml file in the module directory, for now only
  acc_db, acc_syslog & auth_db support it)

12 years ago- added various tls options (commented out)
Jan Janak [Mon, 23 Jun 2008 17:53:09 +0000 (17:53 +0000)]
- added various tls options (commented out)

12 years ago- install ser-oob as ser-advanced
Jan Janak [Mon, 23 Jun 2008 17:43:20 +0000 (17:43 +0000)]
- install ser-oob as ser-advanced
- replace the path to modules in ser-advanced
- install tls configuration
- install ser_cert.sh script

12 years ago- add section numbers to all outputs based on html
Jan Janak [Mon, 23 Jun 2008 17:22:42 +0000 (17:22 +0000)]
- add section numbers to all outputs based on html
- add TOC to txt (which is used to generate READMEs)

12 years ago- enable section numbering in html and txt output
Jan Janak [Mon, 23 Jun 2008 17:21:00 +0000 (17:21 +0000)]
- enable section numbering in html and txt output